Packaging systems configured around your application Defined project scope
INMAYPACK designs and builds automatic sachet packaging machines for powder, liquid, granule and paste — from single-lane horizontal FFS sachet machines to 12-lane vertical stick pack lines running up to 500 sachets per minute. Direct factory pricing from Shanghai, exported to international markets since 2009.
A sachet packing machine is automatic packaging equipment that forms small flat bags from roll film, fills them with a measured dose of powder, liquid, granule or paste, and heat-seals them in one continuous form-fill-seal (FFS) process. Typical outputs are 3-side seal, 4-side seal, center-seal and stick pack sachets from roughly 1 ml to 160 ml.
Two working principles cover almost every application: horizontal form-fill-seal (HFFS) machines — such as the INMAYPACK HS series — for precise single- and dual-lane sachet production at 30–100 bags/min, and vertical multi-lane machines — the DXD series — that run 4 to 12 lanes simultaneously for outputs up to 500 sachets per minute.
INMAYPACK (INMAYPACK) has manufactured sachet, stick pack and flat bag packing machines in Shanghai since 2009, supplying food, coffee, pharmaceutical, cosmetic and agrochemical producers in international markets.
Every machine is built in our Shanghai factory, matched to your product, dose, film and target speed. Click any category to see models, specifications and videos.
DXD series, 4–12 lanes, up to 500 sachets/min for powder, liquid and granule — the highest-output sachet solution.
View machines →
1–10 lane stick pack machines for coffee, sugar, collagen and pharma powders, 15 mm minimum stick width.
View machines →
HS series HFFS platform with interchangeable auger, piston or cup fillers — one machine, multiple products.
View machines →
Classic flat sachets from 60×80 mm to 140×180 mm with eye-mark registration and tear-notch options.
View machines →
Servo auger dosing for fine and non-free-flow powders, 1–120 ml, dust-collection ready, ±1–5% accuracy.
View machines →
Piston-pump filling for sauces, ketchup, honey, oil and shampoo — 50–90 sachets/min, SUS316L contact parts.
View machines →
HS-160TS forms, fills and caps 4-side seal bags with top spout — ideal for jelly drinks, sauces and gels.
View machines →
Duplex HS-180D doubles output to 100 bags/min with two filling stations — seeds, powder and granules.
View machines →Representative models across the HS horizontal series and DXD vertical multi-lane series. Final dose, bag size and output are confirmed after testing your product sample and packaging film.
| Model | Type | Bag Format | Lanes | Speed | Fill Range | Bag Size (mm) | Best For |
|---|---|---|---|---|---|---|---|
| HS-130 | Horizontal FFS | 3/4-side seal flat sachet | 1 | 30–90 bags/min | up to 160 ml | 60×80 – 140×180 | Powder, liquid, paste — multifunction |
| HS-160TS | Horizontal FFS | 4-side seal + top spout | 1 | 35–60 bags/min | per spout size | 4-side seal bag | Jelly drinks, sauces, gels with spout |
| HS-180T | Horizontal FFS | Twin bag (powder + liquid) | 2 stations | 40 bags/min | up to 150 ml | 60×80 – 90×200 | Dual-compartment combo sachets |
| HS-180D | Horizontal FFS | Duplex flat bag | 2 stations | 100 bags/min | up to 150 ml | 60×80 – 90×220 | High-speed seeds, powder, granules |
| DXD-320 | Vertical multi-lane | Stick pack | 1–4 | 20–160 bags/min | 1–40 ml | W ≥15 · L ≥80 | Coffee, sugar, collagen sticks |
| DXD-750 | Vertical multi-lane | Stick pack | 6–10 | 280–480 bags/min | 2–40 ml | W ≥15 · L ≥80 | Mass-production stick packs |
| DXD-900 | Vertical multi-lane | 4-side seal sachet | 4–10 | up to 500 bags/min | 1–120 ml | L 55–165 · W 35–80 | Highest-output powder/liquid sachets |
| DXD-1200 | Vertical multi-lane | 4-side seal sachet | 4–12 | up to 500 bags/min | 1–45 ml | L 45–220 · W 35–80 | Wide-web, maximum lane count |
Dosing accuracy ±1–5% depending on product characteristics · Electrical 200–415 V / 50–60 Hz customizable · CE standards
Start with four decisions: product behavior, accepted output, sachet format and dosing method. Confirm them with representative product and film before the machine configuration is released.
Separate free-flowing, cohesive or aerated powders from granules, liquids and pastes. Product behavior determines the dosing method and whether agitation, dust control, cleaning access or specific product-contact requirements must be included. A multifunction sachet machine can support alternative dosing systems after the application is confirmed.
Define output as an accepted range for the real product, dose and film instead of relying on a catalogue maximum. Decide whether a single-lane route is sufficient or whether a multi-lane sachet machine is justified, then verify the target during product and film trials.
Flat 3-side and 4-side seal sachets suit many single-dose applications. Before approving the pack drawing, use the 3-side vs 4-side seal sachet selection guide to compare the web route, sealed perimeter, artwork, machine scope and FAT evidence. Use stick packs for narrow portions and top-spout flat bags when the application requires a pourable format.
Confirm the laminate, heat-seal response and print registration under the intended machine conditions. Define coding, tear features, dust control, discharge handling and inspection requirements in the URS and FAT scope.
After the machine route is selected, use the sachet packing machine price guide to compare lane count, dosing, inspection, FAT, delivery, commissioning and initial spares on the same commercial boundary.
Compare single-lane sachets, multi-lane sachets, stick packs and premade pouches by powder behavior, dose, pack format and accepted output.
A sachet platform can be configured for powders, liquids, granules or pastes when the dosing method, product-contact design, film and cleaning requirements are matched to the application.
Sauces, honey, jam, dressings and other portion products require viscosity, particulates, dosing behavior, seal contamination risk and cleaning requirements to be reviewed together.
Instant coffee, mixed beverages, cocoa, milk powder and drink mixes must be evaluated for flowability, aeration, dust, target dose and the intended sachet or stick-pack format.
ORS, collagen, protein, herbal powders and liquid doses require project-specific review of dosing targets, hygiene, batch identification, documentation and acceptance testing.
Shampoo, conditioner, creams, sanitizer and detergent samples require the pump, product-contact materials, stringing control, cleaning access and seal-area protection to match the product.
Powders, granules and seeds require application-specific review of containment, segregation, operator protection, dosing behavior, film compatibility and local compliance requirements.
Sugar, salt, desiccants, tea and spice granules should be checked for particle size, bulk density, target dose, discharge behavior and seal cleanliness before lane count is fixed.
INMAYPACK — INMAYPACK — has engineered horizontal and vertical FFS packaging machinery at No.7425 Caolang Road, Jinshan District, Shanghai since 2009. Every sachet machine is assembled, wired and test-run in-house before shipment, with acceptance videos sent using your product and film.
Machines are built on globally serviceable components, so your local technicians can source and maintain them anywhere in the world.
A single-lane horizontal sachet packing machine such as the HS-130 starts from around US$20,000 FOB Shanghai, with the final price depending on the filler type, stainless-steel grade and optional modules like date coders, tear-notch units and conveyors. Multi-lane DXD machines are priced according to lane count and dosing systems. Send your product, dose and target speed for an exact factory quotation after reviewing your requirements.
INMAYPACK multi-lane DXD-900 and DXD-1200 machines reach up to 500 sachets per minute by running 4 to 12 lanes simultaneously. Single-lane horizontal HS series machines run 30 to 100 bags per minute, and the duplex HS-180D reaches 100 bags per minute with two filling stations.
Yes. The multifunction HS series platform accepts interchangeable dosing units — a servo auger or measuring cup for powder and granules, and a piston pump for liquid and paste. The HS-180T twin-bag model can even fill powder and liquid into two connected sachets in the same cycle.
Choose a single-lane HS series machine if you need under 100 sachets per minute, frequent size changes or multiple products on one machine. Choose a multi-lane DXD machine when output above 200 sachets per minute matters most — one operator can supervise up to 12 lanes, which lowers cost per sachet dramatically at scale.
Any heat-sealable laminated roll film works, including PET/AL/PE aluminum foil laminates, paper/PE, PET/PE and BOPP composite films from 60 to 150 microns. Machines accept reels up to 400 mm diameter on a 76 mm core, with photoelectric eye-mark registration for printed films.
After the deposit is placed, INMAYPACK runs sample tests with your actual product and packaging film to confirm dose accuracy, seal quality and speed, then sends full test videos before shipment. Lead time is confirmed in the formal quotation, and every machine ships with a one-year warranty, English manuals and remote LAN support.
Compare the product condition and finished package before moving from sachets to another machine family.
Tell us your product, dose and target speed. Our engineers will recommend the exact HS or DXD model, confirm bag size and film compatibility, and send a detailed factory quotation after reviewing your requirements.
Or email us directly: sales@ewpackmachinery.com