Screen the application
Review the product, package path, dose, output target, utilities and destination.
Packaging project inquiry
Contact INMAYPACK About Your Packaging Project
Send the product, package, fill requirement, target accepted output, utilities and destination. We will review the available information, identify missing inputs and define the next technical discussion.
Prepare the inquiry
What to send for a useful first review
A product name alone is not enough to select a packaging route. The following inputs help separate doypack, sachet, premade-pouch, coffee and integrated-line requirements.
ProductProduct form, flow behaviour, particle size, fragility, viscosity, temperature and cleaning concerns that apply.
PackageFinished format, material, drawing, dimensions, zipper or spout details, artwork repeat and supplied samples.
Fill requirementTarget dose or range, tolerance basis, headspace and any product-contact or contamination constraints.
Accepted outputRequired accepted packs per minute or per shift, product mix, planned run length and changeover expectations.
Utilities and siteVoltage, frequency, phase, compressed air, available space, installation destination and applicable site constraints.
Line interfacesUpstream feed, dosing, coding, inspection, conveying, cartoning and data or control handoffs.
Project path
What happens after you contact us
The response depends on how complete the application information is. Unresolved package, product or acceptance inputs remain open until they can be checked.
Identify missing evidence
Record the samples, drawings, film data, tests or interface details still needed.
Define the proposed scope
Separate the packaging machine, dosing system, line equipment, exclusions and optional items.
Agree the verification basis
Set the applicable test material, conditions, records and acceptance method before relying on performance claims.
Start with the package path
Review the relevant machine route
If the route is already known, include the relevant page with your inquiry. If it is not known, start from the pouch selection hub or turnkey project boundary.
Doypack from roll stock
Horizontal form-fill-seal routes for selected stand-up, zipper, spout and shaped pouch projects.
Review doypack machinesSachet and stick pack
Single- or multi-lane small-format routes for application-matched powder, liquid or granule dosing.
Review sachet machinesPremade pouch
Feeding, opening, filling and sealing routes for compatible preconverted pouches.
Review premade-pouch machinesCoffee packaging
Application routes for compatible capsules, K-Cup formats, beans, powder, sticks and secondary packs.
Review coffee machinesCompare pouch routes
Use the selection hub when the project still needs a roll-stock, sachet or premade-pouch decision.
Compare pouch packing machinesIntegrated packaging line
Define feeding, primary packaging, inspection, conveying, cartoning and control interfaces as one project.
Review turnkey solutions
Samples and acceptance
Keep the quotation tied to the real application
A proposal can only describe the configuration and commercial scope known on its issue date. Machine suitability, output, filling performance and seal results depend on the stated model, options, product, package material, operating conditions and agreed verification method.
Before sending the inquiry
Contact and project questions
Can INMAYPACK review a project before the package format is final?
Yes. Send the product, intended retail format, dose, target output and available package concepts. The early review can compare likely routes and identify the package, film, dosing and test information still needed. It does not replace a final configuration review.
Can I request a quotation without sending samples?
An initial scope may be discussed from drawings and application data. Any performance-dependent statement should remain conditional until the actual product, package material and agreed operating conditions are evaluated.
How should target speed be stated?
State accepted packs per minute or per shift, together with the product, dose, package, run duration and downstream condition. A mechanical cycle rate without those conditions is not an accepted-output requirement.
What service and documentation are included?
Installation, training, remote or on-site support, spare parts, manuals and other deliverables must be defined in the valid proposal or contract for the supplied configuration. Review the service and support scope before order release.
How are destination-market or certification requirements handled?
Send the installation destination and the exact document or compliance requirement. Applicability must be confirmed for the selected model, configuration and destination; a document for one machine or scope does not establish a site-wide claim.
Where is INMAYPACK located?
INMAYPACK is based in Shanghai, China. Any visit, sample trial or project meeting should be arranged against the current project scope and production schedule before travel is booked.
Send the product and package together
Include the product, package drawing, fill requirement, accepted-output target, utilities, destination and any required line interfaces. The next discussion can then focus on the missing decisions and evidence.